MPN TPE-113GI
EAN/UPC 710931505146
Starea stocului
The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locatio...
Full Duplex Gigabit speeds Supplies PoE (15.4W) Network a PoE device located up to 100 meters (328 ft.) away Converts a non-PoE Gigabit port to a PoE Gigabit port Save on installation and equipment costs IEEE 802.3af compliant
CE, FCC
Power
85044095
10Base-T, 100Base-TX
IEEE 802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3af
Gigabit Ethernet
10/100/1000 Mbit/s
Yes
0 - 50 °C
32 - 122 °F
-20 - 60 °C
9,7 cm
0,242 kg
5,9 cm
18,6 cm
2
50/60 Hz
100 - 240 V
15,4 Watt
48 V
0,15 kg
85044090
70 x 45 x 25 mm
The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.
*Datele despre produsul de mai sus sunt furnizate de Icecat. EET nu poate fi făcut responsabil pentru erori în legătură cu aceasta.