Hynix DDR2 SDRAM, ECC, 240pin, 4GB

Hynix DDR2 SDRAM, ECC, 240pin, 4GB

MPN HYMP151F72CP4N3-Y5

EAN/UPC 4047762234676

Starea stocului

This Hynix’s Fully Buffered DIMM is a high-bandwidth & large capacity channel solution that has a narrow host interface. Hynix’s FB-DIMM features novel architecture including the Advanced Memory Buffer that isolates the DDR2 SDRAMs from the channel. This single component located in the front side center of each DIMM, acts as a repeater and buffer for all signals and commands which are exchanged between the host controller and the DDR2 SDRAMs including data in and output. The AMB communicates wit...

Citiți descrierea completă

    Specificații pentru HYMP151F72CP4N3-Y5

    Features

    CAS latency

    5

    Certification

    - RoHS

    Component for

    PC/Server

    ECC

    Yes

    Internal memory

    4 Giga Bites

    Internal memory type

    DDR2

    Memory clock speed

    667 MHz

    Memory form factor

    240-pin DIMM

    Memory layout (modules x size)

    1 x 4 Giga Bites

    Memory ranking

    2

    Memory voltage

    1.8

    Package dimensions

    Gross Weight (Package, kg)

    0,7 kg

    Product dimensions

    Net Weight (Product, kg)

    0,6 kg

    Vendor information

    Brand Name

    Warranty

    1 An(i)

    Descriere

    DDR2 SDRAM, ECC, 240pin, 4GB

    This Hynix’s Fully Buffered DIMM is a high-bandwidth & large capacity channel solution that has a narrow host interface. Hynix’s FB-DIMM features novel architecture including the Advanced Memory Buffer that isolates the DDR2 SDRAMs from the channel. This single component located in the front side center of each DIMM, acts as a repeater and buffer for all signals and commands which are exchanged between the host controller and the DDR2 SDRAMs including data in and output. The AMB communicates with the host controller and adjacent DIMMs on a system board using an industry standard Differential Point to Point Link Interface at 1.5V power.

    The AMB also allows buffering of memory traffic to support large memory capacities. All memory control for the DDR2 SDRAM devices resides in the host, including memory request initiation, timing, refresh, scrubbing, sparing, configuration access and power management. The AMB interface is responsible for handling channel and memory requests to and from the local FBDIMM and for forwarding request to other FBDIMMs on the memory channel.

    - 240 pin Fully Buffered ECC Dual-In-Line DDR2 SDRAM Module
    - JEDEC standard Double Data Rate2 Synchronous DRAMs (DDR2 SDRAMs) with 1.8V +/- 0.1V Power Supply
    - All inputs and outputs are compatible with SSTL_1.8 interface
    - Built with 1Gb DDR2 SDRAMs in 60ball FBGA
    - Host interface and AMB component industry standard compliant
    - MBIST, IBIST test functions
    - 8 Bank architecture
    - OCD (Off-Chip Driver Impedance Adjustment)
    - ODT (On-Die Termination)
    - Fully differential clock operations (CK & /CK)
    - Programmable Burst Length 4 / 8 with both sequential and interleave mode
    - Auto refresh and self refresh supported
    - 8192 refresh cycles / 64ms
    - Serial presence detect with EEPROM
    - 133.35 x 30.35 mm form factor
    - Full DIMM Heat Spreader
    - This product is in compliance with the directive pertaining of RoHS.

    *Datele despre produsul de mai sus sunt furnizate de Icecat. EET nu poate fi făcut responsabil pentru erori în legătură cu aceasta.

    EET RomâniaBregnerød vej 133 D3460 BirkerødNr. TVA 35239480
    România / Română