eSTUFF PLA 3D 2.85mm filament Rose magenta 1kg(Gearlab box)

eSTUFF PLA 3D 2.85mm filament Rose magenta 1kg(Gearlab box)

MPN GLB251311

EAN/UPC 5706998988959

Starea stocului

Există o cantitate limitată a acestui produs

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...

Citiți descrierea completă
  • Pantone 37-1-7

  • Environmentally friendly, bio-degradable polymer

  • Smoke- and odour-free printing

Specificații pentru GLB251311

Features

Brand compatibility

Any brand

Diameter tolerance

0,05 mm

Elongation at break

50 %

Flexural modulus

2300 MPa

Flexural strength

50 MPa

Glass transition temperature (min)

125 °C

Impact strength

0,025 kJ/m²

Non-toxic

Yes

Print speed

60 mm/sec

Print temperature guideline

200 °C

Printing colours

Magenta

Printing material

Polylactic acid (PLA)

Tensile strength

500 kPa

Package dimensions (verified)

Depth Verified

21,1 cm

Gross Weight Verified

1,316 kg

Height Verified

7,8 cm

Width Verified

21,2 cm

Packaging data

Quantity per pack

1 buc.

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 An(i)

Weight & dimensions

Diameter

2,85 mm

Thickness

2,85 mm

Wire length

1280 cm

Descriere

PLA 3D 2.85mm filament Rose magenta 1kg(Gearlab box)

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.



With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

*Datele despre produsul de mai sus sunt furnizate de Icecat. EET nu poate fi făcut responsabil pentru erori în legătură cu aceasta.

EET RomâniaBregnerød vej 133 D3460 BirkerødNr. TVA 35239480
România / Română