- Início
- Redes
- Acessórios
- Placas de Rede
- Cisco 7200 Input/Output Controller with Dual 10/100 Ethernet – C7200-I/O-2FE/E=
Cisco 7200 Input/Output Controller with Dual 10/100 Ethernet
Cisco 7200 Input/Output Controller with Dual 10/100 Ethernet
MPN C7200-I/O-2FE/E=
Nível de stock
The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.
Features:
•Dual EIA/TIA-232 channels for local console and auxiliary ports.
•NVRAM for storing the system configuration and environmental monitoring logs.
•Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS software image.
•Flash memory for storing...
Especificações para C7200-I/O-2FE/E=
Network
Data link protocols
Ethernet, Fast Ethernet
Maximum data transfer rate
100 Mbit/s
Operational conditions
Operating altitude
0 - 4000 m
Operating relative humidity (H-H)
5 - 95 %
Operating temperature (T-T)
5 - 40 °C
Other features
Compliance industry standards
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q
I/O ports
2x RJ-45 1x RJ-45 (cons) 1x RJ-45 (aux)
Internal memory
8 MB
Other network protocols supported
SNMP
Ports quantity
2
Package dimensions
Gross Weight (Package, kg)
3 kg
Ports & interfaces
Connectivity technology
Wired
Host interface
MiniSlot
Product dimensions
Net Weight (Product, kg)
2,9 kg
Product Depth
18,4 cm
Product Height
3,3 cm
Product Width
34 cm
System requirements
Compatible operating systems
Cisco IOS
Vendor information
Brand Name
Warranty
3 Month(s)
Descrição
7200 Input/Output Controller with Dual 10/100 Ethernet
The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.
Features:
•Dual EIA/TIA-232 channels for local console and auxiliary ports.
•NVRAM for storing the system configuration and environmental monitoring logs.
•Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS software image.
•Flash memory for storing the boot helper image.
•Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis.
*Os dados do produto acima são fornecidos pela Icecat. A EET não pode ser responsabilizada por erros relacionados.