Bosch DINION IP 7000 1080p IVA

Bosch DINION IP 7000 1080p IVA

MPN NBN-73023-BA

Varenr. NBN-73023-BA-B

EAN/UPC 8717332994687

OEM 10184

Lagernivå

DINION IP starlight 7000 HD

This camera provides clear images 24/7 – even at night or under low-light conditions. The exceptional starlight sensitivity enables this camera to work with a minimum of ambient light. The extended dynamic mode provides detailed images in scenes with challenging lighting. The camera is available in 1080p or 720p resolution versions and provides up to 60 images per second. There is a selection of high quality lenses separately available.

Excepti...

Les hele beskrivelsen
  • Excellent low-light performance

  • Built-in Intelligent Video Analytics to trigger relevant alerts and quickly retrieve data

  • Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements by up to 50%

  • Extended Dynamic Range mode to see details in bright and dark areas simultaneously

  • Auto back focus for fast installation

Lanview 500m Cat6a U-FTP cable 4x2xAWG23 PE black outdoor
Lanview 500m Cat6a U-FTP cable 4x2xAWG23 PE black outdoor
Designet for profesjonelle nettverk
MPN
Varenr.
LVN122445
W125941340

Spesifikasjoner for NBN-73023-BA

Audio

Audio detection

Yes

Audio formats supported

AAC-LC, G.711

Sample rate

16 kHz

Signal-to-Noise Ratio (SNR)

50 dB

Camera

Adjustment shutter speed

Auto

Angle of rotation

90 °

Camera pan control

Yes

Camera shutter speed

1/25 - 1/15000 Second

Camera shutter type

Electronic

Camera tilt control

Yes

Minimum illumination

0,00080 lx

White balance

Auto, Manual, Sodium lamp

Design

Fog proof

Yes

Form factor

Box

LED indicators

Yes

Mounting type

Ceiling/wall

Product colour

Black, Titanium

Features

NDAA Compliance

Yes

Image sensor

Number of effective pixels (H x V)

1920 x 1080 Pixels

Number of sensors

1

Optical sensor size

1/2.8 "

Sensor type

CMOS

Lens system

Auto focus

Yes

Focus

Motorized

Number of lenses

1

Zoom capability

Yes

Management features

Firmware upgradeable

Yes

Reset button

Yes

Web browser

Yes

Network

Ethernet interface type

Fast Ethernet

Ethernet LAN

Yes

Networking standards

IEEE 802.3af

Quality of Service (QoS) support

Yes

Streaming method

Multicast

Operational conditions

Operating relative humidity (H-H)

20 - 93 %

Operating temperature (T-T)

-20 - 50 °C

Storage relative humidity (H-H)

0 - 98 %

Storage temperature (T-T)

-30 - 70 °C

Package dimensions (verified)

Depth Verified

11 cm

Gross Weight Verified

0,914 kg

Height Verified

10,6 cm

Width Verified

20,5 cm

Packaging content

Manual

Yes

Number of cameras

1

Performance

Alarm input/output

Yes

Auto-tracking

Yes

Certification

CE, cULus, WEEE, RCM, EAC

Connectivity technology

Wired

Day/night mode

Yes

People counting function

Yes

Placement supported

Indoor & outdoor

PTZ control

Yes

Remote viewing

Yes

Type

IP security camera

Wide Dynamic Range (WDR)

Yes

Ports & interfaces

Ethernet LAN (RJ-45) ports

1

RS-232 ports

1

RS-422 ports

1

RS-485 ports

1

Power

Power consumption (typical)

7,2 Watt

Power source type

DC, PoE

Product dimensions

Net Weight (Product, kg)

0,8 kg

Product Depth

14 cm

Product Height

6,6 cm

Product Width

7,8 cm

Security

Active tampering alarm

Yes

HTTPS encryption

Yes

Intelligent Video Surveillance (IVS) system features

Crossing line, Scene change

Password protection

Yes

Storage

Card reader integrated

Yes

Compatible memory cards

MicroSDHC, MicroSDXC

Maximum memory card size

2 TB

Technical details

Sustainability certificates

RoHS

Vendor information

Brand Name

Warranty

3 År

Video

Analog signal format system

NTSC, PAL

Flip & mirror

Yes

Frame rate

60 fps

Image quality adjustment

Brightness, Contrast, Saturation, Sharpness

Maximum resolution

1920 x 1080 Pixels

Noise reduction

Yes

Privacy masking

Yes

Region of Interest (ROI) encoding

Yes

Total megapixels

2 MP

Video formats supported

H.264, M-JPEG

Video intelligence analytic

Yes

Video streaming

Yes

Beskrivelse

DINION IP starlight 7000 HD

This camera provides clear images 24/7 – even at night or under low-light conditions. The exceptional starlight sensitivity enables this camera to work with a minimum of ambient light. The extended dynamic mode provides detailed images in scenes with challenging lighting. The camera is available in 1080p or 720p resolution versions and provides up to 60 images per second. There is a selection of high quality lenses separately available.

Exceptional low-light performance

The latest sensor technology combined with the sophisticated noise suppression results in an exceptional sensitivity in color. The low-light performance is so good that the camera continues to provide excellent color performance even with a minimum of ambient light.

Fast performance

The 60 images-per-second mode provides for optimum performance in fast action scenes and is particularly suitable for casino and banking applications.

High Dynamic Range

The camera has High Dynamic Range. This is based on a multiple-exposure process that captures more details in the highlights and in the shadows even in the same scene. The result is that you can easily distinguish objects and features, for example, faces with bright backlight. The actual dynamic range of the camera is measured using Opto-Electronic Conversion Function (OECF) analysis according to IEC 62676 Part 5. This method is used to provide a standard result which can be used to compare different cameras.

Content Based Imaging Technology

Content Based Imaging Technology (CBIT) is used to radically improve image quality in all lighting conditions and to identify areas for enhanced processing. The camera examines the scene using Intelligent Video Analytics and provides feedback to retune the image processing. This provides better detail in the areas that matter and better all-round performance. With IVA, the Intelligent Auto Exposure technology, for example, allows you to view moving objects in bright and dark areas of a scene.

Intelligent Video Analytics

The built-in video analytics is both robust and intelligent. The Intelligence-at-the-Edge concept now delivers even more powerful features:
- Simple calibration
- False alarm reduction
- Extended range identification
- Crowd and queue management
- Density and flow counting
The mission critical video analytics reliably detects, tracks, and analyzes objects, and alerts you when predefined alarms are triggered. A smart set of alarm rules, together with object filters and tracking modes, makes complex tasks easy. The system is also extremely robust and is able to reduce false alarms, for example from foliage or shaking objects, even in harsh weather conditions. Metadata is attached to your video to add sense and structure. This enables you to quickly retrieve the relevant images from hours of stored video. Metadata can also be used to deliver irrefutable forensic evidence or to optimize business processes based on people counting or crowd density information. Calibration is quick and easy – just enter the height of the camera. The internal gyro/accelerometer sensor provides the rest of the information to precisely calibrate the video analytics.

Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements

The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly. The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.

Area-based encoding

Area-based encoding is another feature which reduces bandwidth. Compression parameters for up to eight user-definable regions can be set. This allows uninteresting regions to be highly compressed, leaving more bandwidth for important parts of the scene.

Bitrate optimized profile

The average typical optimized bandwidth in kbits/s for various image rates is shown in the table. To increase system reliability, the camera can be simultaneously connected to both PoE and +12 VDC supplies. If one power source fails, the other source takes over without a reboot so providing power redundancy. The auto-focus lens wizard makes it easy for an installer to accurately focus the camera for both day and night operation. The wizard is activated from the web browser or from the on-board camera push button making it easy to choose the workflow that suits best. The automatic motorized back focus adjustment with 1:1 pixel mapping ensures the camera is always focused accurately.

Automatic image rotation

The integrated gyro/accelerometer sensor automatically corrects the image orientation in steps of 90° if the camera is mounted at right angles or upside down. The sensor image can also be rotated manually through steps of 90°. To efficiently capture details in long hallways without loss of resolution, mount the camera at right angles. The image is displayed upright at full resolution on your monitor.

Scene modes

The camera has a very intuitive user interface that allows fast and easy configuration. Nine configurable modes are provided with the best settings for a variety of applications. Different scene modes can be selected for day or night situations.

Hybrid operation

A surge-protected analog video output allows full hybrid operation. This means that high resolution IP video streaming and an analog video output are available simultaneously. The hybrid functionality offers an easy migration path from legacy CCTV to a modern IP-based system.

True day/night switching

The camera is a true day/night camera with a mechanical filter for vivid daytime color and exceptional night-time imaging while maintaining sharp focus under all lighting conditions. The filter can be switched remotely, or automatically via a light level sensor or contact input.

Data security

Special measures have been put in place to ensure the highest level of security for device access and data transport. The three-level password protection with security recommendations allows users to customize device access. Web browser access can be protected using HTTPS and firmware updates can also be protected with authenticated secure uploads. The on-board Trusted Platform Module (TPM) and Public Key Infrastructure (PKI) support, guarantee superior protection from malicious attacks. The 802.1x network authentication with EAP/TLS, supports TLS 1.2 with updated cipher suites including AES 256 encryption. The advanced certificate handling offers:
- Self-signed unique certificates automatically created when required
- Client and server certificates for authentication
- Client certificates for proof of authenticity
- Certificates with encrypted private keys

Multiple streams

The innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems. The camera can run multiple independent streams that allows to set a different resolution and frame rate on the first and second stream. The user can also choose to use a copy of the first stream. The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.

Regions of interest and E-PTZ

Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image. These regions produce separate streams for remote viewing and recording. These streams, together with the main stream, allow the operator to separately monitor the most interesting part of a scene while still retaining situational awareness. Intelligent Tracking can follow objects within the defined regions of interest. Intelligent Tracking can autonomously detect and track moving objects or the user can click on an object which the tracker will then follow.

Storage management

Recording management can be controlled by the Bosch Video Recording Manager (Video Recording Manager) or the camera can use iSCSI targets directly without any recording software.

Edge recording

Insert a memory card into the card slot to store up to 2 TB of local alarm recording. Pre-alarm recording in RAM reduces recording bandwidth on the network, and extends the effective life of the memory card.

Cloud-based services

The camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts. Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal events.

Easy installation

Power for the camera can be supplied via a Powerover-Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera. Using PoE makes installation easier and more costeffective, as cameras do not require a local power source. The camera can also be supplied with power from +12 VDC power supplies.

Complete viewing software

There are many ways to access the camera’s features: using a web browser, with the Bosch Video Management System, with the free-of-charge Bosch Video Client or Video Security Client, with the video security mobile app, or via third-party software.

Video security app

The Bosch video security mobile app has been developed to enable Anywhere access to HD surveillance images allowing you to view live images from any location. The app is designed to give you complete control of all your cameras, from panning and tilting to zoom and focus functions. It’s like taking your control room with you. This app, together with the separately available Bosch transcoder, will allow you to fully utilize our dynamic transcoding features so you can play back images even over low-bandwidth connections.

System integration

The camera conforms to the ONVIF Profile S specifications. Compliance with these standards guarantees interoperability between network video products regardless of manufacturer. Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website (ipp.boschsecurity.com) for more information.

*Produktinformasjonen ovenfor er levert av Icecat. EET kan ikke holdes ansvarlig for feil i forbindelse med dette.

EET NorgeOlaf Helsets vei 60694 OsloMVA-nr. 956967864
Norge / Norsk