eSTUFF Gearlab PLA 3D 2.85mm filament Nature 1kg

eSTUFF Gearlab PLA 3D 2.85mm filament Nature 1kg

MPN GLB251319

EAN/UPC 5706998989024

Lagernivå

Det er et begrenset antall av dette produktet

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...

Les hele beskrivelsen
  • Smoke- and odour-free printing

  • Enhanced post-print workability

  • Easy to print filament with stable printing size and low material shrinkage

  • Environmentally friendly, bio-degradable polymer

Spesifikasjoner for GLB251319

Features

Brand compatibility

Any brand

Diameter tolerance

0,05 mm

Elongation at break

50 %

Flexural modulus

2300 MPa

Flexural strength

50 MPa

Glass transition temperature (min)

125 °C

Impact strength

0,025 kJ/m²

Non-toxic

Yes

Print speed

60 mm/sek

Print temperature guideline

200 °C

Printing colours

Neutral

Printing material

Polylactic acid (PLA)

Tensile strength

500 kPa

Package dimensions (verified)

Depth Verified

21,1 cm

Gross Weight Verified

1,316 kg

Height Verified

8 cm

Width Verified

21,2 cm

Packaging data

Quantity per pack

1 stykker

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 År

Weight & dimensions

Diameter

2,85 mm

Thickness

2,85 mm

Wire length

1280 cm

Beskrivelse

Gearlab PLA 3D 2.85mm filament Nature 1kg

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.



With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

*Produktinformasjonen ovenfor er levert av Icecat. EET kan ikke holdes ansvarlig for feil i forbindelse med dette.

EET NorgeOlaf Helsets vei 60694 OsloMVA-nr. 956967864
Norge / Norsk