MPN GLB251240
Varenr. W126146185
EAN/UPC 5704174477990
Lagernivå
Det er et begrenset antall av dette produktet
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent a...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Universal
0,05 mm
4 %
2150 MPa
63 MPa
46,1 kJ/m²
180 °C
Yes
150 mm/sek
210 °C
Blue
Polylactic acid (PLA)
1260 kPa
7,5 cm
1,12 kg
20,5 cm
20,5 cm
1,05 kg
7 cm
20 cm
20 cm
1 År
1,75 mm
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
*Produktinformasjonen ovenfor er levert av Icecat. EET kan ikke holdes ansvarlig for feil i forbindelse med dette.