Brodit ProClip 511632, Samsung Galaxy Tab 4 10.1 SM-T530 / SM-T531 / SM-T535

Brodit ProClip 511632, Samsung Galaxy Tab 4 10.1 SM-T530 / SM-T531 / SM-T535

MPN 511632

EAN/UPC 5711783369196

OEM 5-511632

Lagernivå

Passive holder with tilt swivel

With your Galaxy Tab in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Galaxy Tab when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is ...

Les hele beskrivelsen

    Spesifikasjoner for 511632

    Features

    Product colour

    Black

    Proper use

    Car

    Type

    Passive

    Package dimensions

    Gross Weight (Package, kg)

    0,25 kg

    Product dimensions

    Net Weight (Product, kg)

    0,2 kg

    Vendor information

    Brand Name

    Homepage

    http://www.brodit.se/product.html?locale=se&id=511632

    Warranty

    1 År

    Beskrivelse

    ProClip 511632, Samsung Galaxy Tab 4 10.1 SM-T530 / SM-T531 / SM-T535

    Passive holder with tilt swivel

    With your Galaxy Tab in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Galaxy Tab when it is in the holder.

    The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Galaxy Tab into place in the holder, and to take it with you when leaving the car.

    Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

    An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

    INSTALLATION INSTRUCTIONS:
    Please read all of the instructions and look at the pictures before attaching the holder.

    1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

    2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

    3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

    4. The holder is in place.

    *Produktinformasjonen ovenfor er levert av Icecat. EET kan ikke holdes ansvarlig for feil i forbindelse med dette.

    EET NorgeOlaf Helsets vei 60694 OsloMVA-nr. 956967864
    Norge / Norsk