eSTUFF PLA 3D 2.85mm filament Fluo green 1kg(Gearlab box)

eSTUFF PLA 3D 2.85mm filament Fluo green 1kg(Gearlab box)

MPN GLB251308

EAN/UPC 5706998988928

Voorraadniveau

Dit artikel is beperkt beschikbaar

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.

3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where d...

Lees de volledige beschrijving
  • Pantone 802

  • Smoke- and odour-free printing

  • Enhanced post-print workability

  • Easy to print filament with stable printing size and low material shrinkage

  • Environmentally friendly, bio-degradable polymer

Soortgelijke alternatieven
eSTUFF PLA 2,85mm 1KG  Fluo Green(Gearlab box)
eSTUFF PLA 2,85mm 1KG Fluo Green(Gearlab box)
MPN
Art.nr.
GLB251408
W126164135

Beperkt verkrijgbaar artikel

Specificaties voor GLB251308

Features

Brand compatibility

Any brand

Diameter tolerance

0,05 mm

Elongation at break

50 procent

Flexural modulus

2300 MPa

Flexural strength

50 MPa

Glass transition temperature (min)

125 °C

Impact strength

0,025 kJ/m²

Non-toxic

Yes

Print speed

60 mm/sec

Print temperature guideline

200 °C

Printing colours

Fluorescent green

Printing material

Polylactic acid (PLA)

Tensile strength

500 kPa

Package dimensions (verified)

Depth Verified

21,2 cm

Gross Weight Verified

1,314 kg

Height Verified

7,7 cm

Width Verified

21,5 cm

Packaging data

Quantity per pack

1 stuk(s)

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 Ja(a)r(en)

Weight & dimensions

Diameter

2,85 mm

Thickness

2,85 mm

Wire length

1280 cm

Beschrijving

PLA 3D 2.85mm filament Fluo green 1kg(Gearlab box)

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.

3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.

Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.

With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

*Bovenstaande productgegevens zijn aangeleverd door Icecat. EET kan hiervoor niet aansprakelijk gehouden worden.

EET BelgiumKoeweidestraat 461785 MerchtemBTW-nummer BE-0660.711.441
België / Nederlands