eSTUFF PLA 3D 2.85mm filament Transparent orange 1kg(Gearlab box)

eSTUFF PLA 3D 2.85mm filament Transparent orange 1kg(Gearlab box)

MPN GLB251364

EAN/UPC 5706998989956

Livello stock

Lo stock del prodotto è limitato

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...

Leggi la descrizione completa
  • Pantone 151

  • Smoke- and odour-free printing

  • Enhanced post-print workability

  • Easy to print filament with stable printing size and low material shrinkage

  • Environmentally friendly, bio-degradable polymer

Specifiche per GLB251364

Features

Brand compatibility

Any brand

Diameter tolerance

0,05 mm

Elongation at break

3 %

Flexural modulus

2500 MPa

Flexural strength

60 MPa

Glass transition temperature (min)

55 °C

Impact strength

0,016 kJ/m²

Non-toxic

Yes

Print speed

60 mm/s

Print temperature guideline

200 °C

Printing colours

Orange, Transparent

Printing material

Polylactic acid (PLA)

Tensile strength

600 kPa

Package dimensions

Depth (package,cm)

21,3 cm

Gross Weight (Package, kg)

1,31 kg

Height (package,cm)

7,4 cm

Width (package,cm)

21,3 cm

Packaging data

Quantity per pack

1 pz

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 Anno(i)

Weight & dimensions

Diameter

2,85 mm

Thickness

2,85 mm

Wire length

1280 cm

Descrizione

PLA 3D 2.85mm filament Transparent orange 1kg(Gearlab box)

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.



With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

*Le informazioni del prodotto sopra riportate sono fornite da Icecat. EET non può essere ritenuta responsabile di errori in relazione a ciò..

EET ItaliaSede Via Carroccio 620123 MilanoPartita IVA 13250550152 - MI1631921 c.s.€10.000,00i.v. - Sogg. Direz/Coordin da parte di EET Group A/S
Italia / Italiano