Brodit Huawei MediaPad T1 8.0 passive holder with tilt swivel

Brodit Huawei MediaPad T1 8.0 passive holder with tilt swivel

MPN 511871

EAN/UPC 7320285118713

Livello stock

With your MediaTab T1 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the MediaTab when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the MediaTab into place in the hol...

Leggi la descrizione completa

    Specifiche per 511871

    Design

    Compatibility

    Huawei MediaPad T1 8.0

    Mobile device type

    Tablet/UMPC

    Product colour

    Graphite

    Proper use

    Car

    Type

    Passive holder

    Multimedia

    Built-in speaker(s)

    No

    Package dimensions (verified)

    Depth Verified

    15 cm

    Gross Weight Verified

    0,162 kg

    Height Verified

    6,1 cm

    Width Verified

    23,3 cm

    Power

    Power source type

    Not supported

    Product dimensions

    Net Weight (Product, kg)

    0,062 kg

    Vendor information

    Brand Name

    Homepage

    http://www.brodit.se/product.html?locale=se&id=511871

    Warranty

    1 Anno(i)

    Descrizione

    Huawei MediaPad T1 8.0 passive holder with tilt swivel

    With your MediaTab T1 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the MediaTab when it is in the holder.

    The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the MediaTab into place in the holder, and to take it with you when leaving the car.

    Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

    An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

    *Le informazioni del prodotto sopra riportate sono fornite da Icecat. EET non può essere ritenuta responsabile di errori in relazione a ciò..

    EET ItaliaSede Via Carroccio 620123 MilanoPartita IVA 13250550152 - MI1631921 c.s.€10.000,00i.v. - Sogg. Direz/Coordin da parte di EET Group A/S
    Italia / Italiano