MPN GLB251240
Cikkszám W126146185
EAN / UPC 5704174477990
Készlet szint
Ez a termék korlátozott mennyiségben elérhető
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent a...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Universal
0,05 mm
4 %
2150 MPa
63 MPa
46,1 kJ/m²
180 °C
Yes
150 mm/sec
210 °C
Blue
Polylactic acid (PLA)
1260 kPa
7,5 cm
1,12 kg
20,5 cm
20,5 cm
1,05 kg
7 cm
20 cm
20 cm
1 Év(ek)
1,75 mm
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
*A fenti termékadatokat az Icecat szolgáltatja. Az EET nem tehető felelőssé az ezzel kapcsolatos hibákért.