eSTUFF PLA Silk 1,75mm 1KG White(Gearlab box)

eSTUFF PLA Silk 1,75mm 1KG White(Gearlab box)

MPN GLB251221

Cikkszám W126146180

EAN / UPC 5704174477945

Készlet szint

Ez a termék korlátozott mennyiségben elérhető

Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.



Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent a...

Olvassa el a teljes leírást
  • Environmentally friendly, bio-degradable polymer

  • Printing temperature: 185-215° C

  • Bed temperature: 0-45° C

  • Printing speed: 40-150 mm/s

Specifikációk a termékről GLB251221

Features

Brand compatibility

Universal

Diameter tolerance

0,05 mm

Elongation at break

4 %

Flexural modulus

2150 MPa

Flexural strength

63 MPa

Impact strength

46,1 kJ/m²

Melting point (max)

180 °C

Non-toxic

Yes

Print speed

150 mm/sec

Print temperature guideline

210 °C

Printing colours

White

Printing material

Polylactic acid (PLA)

Tensile strength

1260 kPa

Package dimensions

Depth (package,cm)

7,5 cm

Gross Weight (Package, kg)

1,12 kg

Height (package,cm)

20,5 cm

Width (package,cm)

20,5 cm

Product dimensions

Net Weight (Product, kg)

1,05 kg

Product Depth

7 cm

Product Height

20 cm

Product Width

20 cm

Vendor information

Brand Name

Warranty

1 Év(ek)

Weight & dimensions

Diameter

1,75 mm

Leírás

PLA Silk 1,75mm 1KG White(Gearlab box)

Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.



Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.



The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.

*A fenti termékadatokat az Icecat szolgáltatja. Az EET nem tehető felelőssé az ezzel kapcsolatos hibákért.

EET MagyarországBregnerødvej 133 D3460 BirkerødAdószám 35239480
Magyarország / Magyar