Allied Telesis 100TX to 100FX (SC) standalone media converter, UK power cord

Allied Telesis 100TX to 100FX (SC) standalone media converter, UK power cord

MPN AT-MC102XL-60

EAN / UPC 767035191744

Niveau de stock

Fibre connections
The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.

Auto-negotiation and MissingLink™
The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their ...

Lire la description complète

    Caractéristiques AT-MC102XL-60

    Connectivité

    Technologie de connectivité

    Avec fil

    Design

    Safety

    UL-Cul, CSA/CSA, NRTL, TUV, CE

    Détails techniques

    Harmonized System (HS) code

    85176990

    Logistics data

    Harmonized System (HS) code

    85176990

    Network

    Cabling technology

    100TX/100FX

    Maximum data transfer rate

    100 Mbit/s

    Operational conditions

    Operating relative humidity (H-H)

    5 - 95 %

    Operating temperature (T-T)

    0 - 40 °C

    Storage temperature (T-T)

    -20 - 80 °C

    Other features

    Connector(s)

    SC

    Dimensions (WxDxH)

    105 x 95 x 25 mm

    Émissions électromagnétiques

    FCC Class B

    Protocoles de liaison de données

    Fast Ethernet

    Package dimensions (verified)

    Depth Verified

    15,4 cm

    Gross Weight Verified

    0,694 kg

    Height Verified

    8,6 cm

    Width Verified

    28,1 cm

    Power

    Power consumption (typical)

    6 Watt

    Product dimensions

    Net Weight (Product, kg)

    0,2 kg

    Vendor information

    Brand Name

    Warranty

    1 Année (s)

    Description

    100TX to 100FX (SC) standalone media converter, UK power cord

    Fibre connections
    The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.

    Auto-negotiation and MissingLink™
    The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to each
    other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost.

    Simple installation
    Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch
    with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment.

    Standalone or rackmounted
    Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low
    cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second
    load sharing internal power supply can be installed into the rackmount chassis.

    *Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.

    EET France38 rue Mozart92110 ClichyNuméro de TVA 82 430 022 913
    France / Français