Brodit ProClip 511571, Ingenico iPP 350

Brodit ProClip 511571, Ingenico iPP 350

MPN 511571

Réf. W126186427

EAN / UPC 7320285115712

Passive holder with tilt swivel
With your unit in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the unit in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the unit when it is in the holder. Attach onto ProClip Mounting Platform.

INSTALLATION INSTRUCTIONS:
Please r...

Lire la description complète

    Caractéristiques

    Design

    Compatibilité

    Ingenico iPP 350

    Couleur du produit

    Noir

    Type

    Passive holder

    multimédia

    Haut-parleurs intégrés

    Non

    Package dimensions

    Gross Weight

    0,3 kg

    Product dimensions

    Net Weight

    0,2 kg

    Puissance

    Type de source d'alimentation

    Non pris en charge

    Vendor information

    Brand Name

    Homepage

    http://www.brodit.se/product.html?locale=se&id=511571

    Warranty

    1 Année (s)

    Description

    ProClip 511571, Ingenico iPP 350

    Passive holder with tilt swivel
    With your unit in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the unit in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the unit when it is in the holder. Attach onto ProClip Mounting Platform.

    INSTALLATION INSTRUCTIONS:
    Please read all of the instructions and look at the pictures before attaching the holder.

    1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

    2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.

    3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

    4. The holder is in place.

    *Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.