Moxa ICF-1150I-M-ST-T, Industrial RS-232/422/485 to multimode fiber converter, ST connector, 2 KV isolation

Moxa ICF-1150I-M-ST-T, Industrial RS-232/422/485 to multimode fiber converter, ST connector, 2 KV isolation

MPN 43432

Réf. 43432M

EAN / UPC 5703431434325

OEM ICF-1150I-M-ST-T

Niveau de stock

Three-Way Communication

The ICF-1150 series support 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will...

Lire la description complète
  • 3-way communication: RS-232, RS-422/485, and fiber

  • Rotary switch to change the pull high/low resistor value

  • Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode

  • -40 to 85°C wide-temperature range models available

  • C1D2, ATEX, and IECEx certified for harsh industrial environments

Alternatives exactes
Verbatim CD-R Extra Protection, 700MB, 52x

Caractéristiques 43432

Certificates

Certification

UL, CE, FCC, ATEX, UL/cUL

Indication

Voyants

Oui

Operational conditions

Humidité relative de fonctionnement (H-H)

5 - 95 %

Operating temperature (T-T)

-40 - 85 °C

Storage temperature (T-T)

-40 - 85 °C

Package dimensions

Depth (package,cm)

2,2 cm

Gross Weight (Package, kg)

1 kg

Height (package,cm)

4,2 cm

Width (package,cm)

8 cm

Poids et dimensions

Dimensions (LxPxH)

30.3 x 70 x 115 mm

Product dimensions

Net Weight (Product, kg)

0,5 kg

Puissance

Consommation électrique

163 mA

Tension d'entrée

12 - 48 V

Technical details

Connecteur de fibre optique

ST

Distance de transmission (multi-mode)

5 km

Interface de l'hôte

RS-232

Interface de sortie

Fibre (ST)

Isolation

2 kV

Longueur d'onde

850 nm

Montage

rail DIN

Protection contre la surintensité

Oui

Protection contre les décharges électrostatiques (DES)

15 kV

Sensibilité RX

-20 dB

Signaux RS-422

RxD+, RxD-, SGND, TxD+, TxD-

Signaux RS-485

RxD+, RxD-, SGND, TxD+, TxD-

Sortie TX

-5 dB

Vitesse de transmission

921,6 Kbit/s

Vendor information

Brand Name

Warranty

2 Année (s)

Description

ICF-1150I-M-ST-T, Industrial RS-232/422/485 to multimode fiber converter, ST connector, 2 KV isolation

Three-Way Communication

The ICF-1150 series support 2 serial ports, with a D-sub connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer's serial port to the RS-485 bus.

Rotary Switch for Setting the Pull High/Low Resistor

The RS-485 interface supports multi-drop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN-rail.

*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.

EET France38 rue Mozart92110 ClichyNuméro de TVA 82 430 022 913
France / Français