Cisco Nexus 7010 Bundle (Chassis, SUP1, 3x FAB1, 2x AC-6KW PSU)

Cisco Nexus 7010 Bundle (Chassis, SUP1, 3x FAB1, 2x AC-6KW PSU)

MPN N7K-C7010-BUN

OEM N7K-C7010-BUN

Saatavuus

Cisco Nexus 7000 Series 10-Slot Chassis

- The Cisco Nexus 7000 Series 10-slot chassis with up to eight I/O module slots supports up to 256 10 Gigabit Ethernet or 384 Gigabit Ethernet ports, meeting the demands of large deployments.
- Front-to-back airflow helps ensure that use of the Cisco Nexus 7000 Series 10-slot chassis addresses the requirement for hot-aisle and cold-aisle deployments without additional complexity.
- The system uses dual system and fabric fan trays for co...

Lue koko kuvaus

    Tekniset tiedot N7K-C7010-BUN

    Certificates

    Safety

    UL/CSA/IEC/EN 60950-1, AS/NZS 60950

    Operational conditions

    Operating altitude

    0 - 2000 m

    Operating relative humidity (H-H)

    5 - 95 %

    Operating temperature (T-T)

    0 - 40 °C

    Storage relative humidity (H-H)

    5 - 95 %

    Storage temperature (T-T)

    -40 - 70 °C

    Package dimensions

    Gross Weight (Package, kg)

    3 kg

    Ports & interfaces

    Expansion slots

    10

    Power

    AC adapter output voltage

    110 V

    Number of power supply units

    2

    Product dimensions

    Height (product,cm)

    93,3 cm

    Net Weight (Product, kg)

    3 kg

    Product Depth

    84,1 cm

    Product Width

    43,9 cm

    Technical details

    Heat dissipation

    12000 BTU/h

    Noise level

    67,2 dB

    Product colour

    Black

    Rack capacity

    21U

    Required software

    Cisco NX-OS 4.0

    Vendor information

    Brand Name

    Warranty

    3 Month(s)

    Kuvaus

    Nexus 7010 Bundle (Chassis, SUP1, 3x FAB1, 2x AC-6KW PSU)

    Cisco Nexus 7000 Series 10-Slot Chassis

    - The Cisco Nexus 7000 Series 10-slot chassis with up to eight I/O module slots supports up to 256 10 Gigabit Ethernet or 384 Gigabit Ethernet ports, meeting the demands of large deployments.
    - Front-to-back airflow helps ensure that use of the Cisco Nexus 7000 Series 10-slot chassis addresses the requirement for hot-aisle and cold-aisle deployments without additional complexity.
    - The system uses dual system and fabric fan trays for cooling. Each fan tray is redundant and composed of independent variable-speed fans that automatically adjust to the ambient temperature, helping reduce power consumption in well-managed facilities while providing optimum operation of the switch. The system design increases cooling efficiency and provides redundancy capabilities, allowing hot swapping without affecting the system; if either a single fan or a complete fan tray fails, the system continues to operate without a significant degradation in cooling capacity.
    - The integrated cable management system is designed for fully configured systems cabling to be groomed either to a single side or to both sides for maximum flexibility without obstructing any important components, which eases maintenance even when the system is fully cabled.
    - The system supports an optional air filter to help ensure clean air flow through the system. The addition of the air filter satisfies Network Equipment Building Standards (NEBS) requirements.
    - A series of LEDs at the top of the chassis provides a clear summary of the status of the major system components, alerting operators to the need to conduct further investigation. These LEDs report the power supply, fan, fabric, supervisor, and I/O module status.
    - The cable management cover and optional front module doors provide protection from accidental interference with both the cabling and modules installed in the system. The transparent front door allows observation of cabling and module indicator and status lights.

    *Icecat toimittaa yllä olevat tuotetiedot. EET ei ole vastuussa niihin liittyvistä virheistä.

    EET FinlandSpektri Business Park02130 EspooALV FI08652556
    Suomi / Suomi