MPN IB-120CL-U3
EAN/UPC 4250078185659
OEM ICY BOX-20907
Saatavuus
JBOD Docking- and Clone Station with USB 3.0
A cabinet full with HDDs to work with is a good reason to use this double docking station. It is for 2.5" as well as for 3.5" SATA HDDs. The aluminium casing provides firm standing and good looking. The 2.5" HDDs might have a height of 9.5 or 12.5 mm, even 15 mm. Due to its power supply the dock also runs HDDs, which need 12 V. USB 3.0 accelerates the transfer of huge data, e. g. movies, enormously. Connecting with a PC the two HDDs ar...
Stylish premium aluminium case
Support both 2.5" and 3.5" SATA HDD
Bootable HDD cloning without PC (Stand alone)
JBOD - the PC detects 2 independent drives
External data interface: 1x USB 3.0
Hot Plug & Play and Hot Swap
84733020
No
Windows, Linux, Mac
USB
100-240 V/50-60 Hz/1.2 A - 12 V/ 3 A
6 cm
0,76 kg
23 cm
18 cm
Yes
USB
Aluminium
Yes
Yes
Silver, White
Wired
USB 3.2 Gen 1 (3.1 Gen 1) Type-A
1
36 Watt
11 cm
5,5 cm
0,66 kg
13,5 cm
2
Serial ATA
2.5, 3.5
84733020
2 Vuosi(a)
JBOD Docking- and Clone Station with USB 3.0
A cabinet full with HDDs to work with is a good reason to use this double docking station. It is for 2.5" as well as for 3.5" SATA HDDs. The aluminium casing provides firm standing and good looking. The 2.5" HDDs might have a height of 9.5 or 12.5 mm, even 15 mm. Due to its power supply the dock also runs HDDs, which need 12 V. USB 3.0 accelerates the transfer of huge data, e. g. movies, enormously. Connecting with a PC the two HDDs are detected as two independent drives under JBOD Mode. Without PC you can clone the HDD just by pushing a button. You can even clone a bootable HDD with operating system.
One of our first
Two 2.5" or 3.5" HDDs can stand on their head inside this docking station. Both HDD slots are equipped with an individual LED indicator to display infor regarding power and HDD activity. A blue LED on the front of the device indicaes if the docking station is on or off.
Cloning made easy
The PC recognize two autonomous drives when the docking station is connected to a PC with a USB 3.0 cable. In this way, it is easy to exchange data and work with the HDDs. Before starting the clone operation, the USB cable should be disconnected from the device. A total of four LEDs indicate the progress of the operation.
For megalomaniacs
The hard disks (2.5 ") may have a maximum height of 15 mm so it is easy to fit any kind in the shafts place. For the 3.5" has of course a little bit more hard drives space available.
*Icecat toimittaa yllä olevat tuotetiedot. EET ei ole vastuussa niihin liittyvistä virheistä.