MPN GLB251326
EAN/UPC 5706998989079
Saatavuus
Tätä tuotetta on rajoitetusti
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
...
Pantone 871
Environmentally friendly bio-degradable polymer
Enhanced post-print workability
Smoke- and odour-free printing
Pearl effect to give an almost satin metallic finish when polished
Any brand
0,05 mm
50 %
2300 MPa
50 MPa
125 °C
0,025 kJ/m²
Yes
60 mm/s
200 °C
Gold
Polylactic acid (PLA)
500 kPa
21,3 cm
1,31 kg
7,4 cm
21,3 cm
1 pc(s)
1 kg
1 Vuosi(a)
2,85 mm
2,85 mm
1280 cm
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.
With Pearl PLA it is easy to print big parts due to its thermal stability. While PLA is stiff, hard, and more brittle than other compounds, Pearl PLA is much stronger and offers 8 times higher impact strength than normal PLA.
Pearl PLA 3D Filament is ideal for educational use as part of STE@M learning, as well as for corporate and private concept and rapid prototype modelling.
*Icecat toimittaa yllä olevat tuotetiedot. EET ei ole vastuussa niihin liittyvistä virheistä.