MPN 38355
Tuotenro W128456845
EAN/UPC 4002888383554
Saatavuus
The Lindy 100m Cat.6 4 Port HDMI 4K60 HDBaseT Splitter Extender is an high end solution to Extend HDMI signals to 4 HDBaseT receivers (not included) using Cat.6 or above cables up to 100m.Compatible with most HDBaseT receivers on the market like N. 38342 and 38214.
Supporting resolutions up to 4K60Hz including HDR and 1080p, the Splitter Extender is designed for use in Pro AV and digital signage applications for a variety of settings such as education, retail, immersive displays at even...
HDBaseT Splitter Extender that extends and distributes HDMI, IR and RS-232 signals to 4 displays at distances of up to 100m
Supports resolutions up to 4K60Hz with HDR
Features a loop-through HDMI output for local monitoring
Supports Power over Cable (PoC), EDID management and Audio de-embedding
2 year warranty
8 bittiä
18 Gbit/s
4K Ultra HD
Metal
100 m
60 Hz
3840 x 2160 Pixels
Black
Cat6
Y/Yes
20 - 90 %
0 - 40 °C
-20 - 60 °C
28,5 cm
2,34 kg
10 cm
28 cm
Y/Yes
IR/Power
Y/Yes
1 kpl
8
Y/Yes
4
2.0
3.5 mm
Y/Yes
HDMI
HDMI
2
4 cm
2,34 kg
13 cm
22 cm
2 Vuosi(a)
The Lindy 100m Cat.6 4 Port HDMI 4K60 HDBaseT Splitter Extender is an high end solution to Extend HDMI signals to 4 HDBaseT receivers (not included) using Cat.6 or above cables up to 100m.Compatible with most HDBaseT receivers on the market like N. 38342 and 38214.
Supporting resolutions up to 4K60Hz including HDR and 1080p, the Splitter Extender is designed for use in Pro AV and digital signage applications for a variety of settings such as education, retail, immersive displays at events and conference rooms.
It supports several signals and features such asdigital and analog de-embedded audio, IR and RS-232 control or pass-through signals. An advanced EDID management allow the userto select different EDID modes while the integrated HDMI loop-out port enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone.
PoC (Power over Cable) functionality can be switched on and off to provide additional flexibility; this allows power to be supplied alongside data through Cat.6 network cable between the transmitter and any HDBaseT receiver with this function, meaning only a single power supply is required at the transmitter unit.
Please Note:Receviers are not included, ensure to use HDBaseT receivers that support all the required features.
*Icecat toimittaa yllä olevat tuotetiedot. EET ei ole vastuussa niihin liittyvistä virheistä.