- Esileht
- Lanview high-performance, HD optical fiber Fusion Splicer. – LVO290106
Lanview high-performance, HD optical fiber Fusion Splicer.
Disainitud professionaalsele võrgule
Lanview high-performance, HD optical fiber Fusion Splicer.
MPN LVO290106
Toote nr W126848559
EAN / UPC 5704174861355
Laoseis
Graphical interfaces and touch screen
uses entirely new GUI graphical interfaces and touch screen in design. Operators can set up the splicer
and get to know relevant information of it simply and directly by graphical interfaces.
Water-resistant and dust-resistant can meet IP52 requirements.
The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and rubber-insulted wires with a
cladding diameter of 80～150μ m.
Small in size and light in weight,...
Precise fiber core alignment
ultra-low fiber fusion splicing consumption 7s fast fusion splicing
18s highly efficient heating
320 times image magnification
Dual-direction splicing, automatic splicing, intelligent pyro condensation
Lanview Fiberoptic buffer stripper(250my)
Disainitud professionaalsele võrgule
MPN
Toote nr
LVO231760
W126172619
Lanview Fibre cable 12 x OM3 LSZH indoor/outdoor 200m
Disainitud professionaalsele võrgule
MPN
Toote nr
LVO231995-200
W126147440
Spetsifikatsioonid LVO290106
Features
Applicable fiber
Multimode Fiber (MMF)/Single Mode Fiber (SMF)
Cladding diameter (max)
150 µm
Cladding diameter (min)
80 µm
Display type
LCD
Heating time
18 Second
Product colour
Black/Green
Splicing time
7 Second
Package dimensions
Gross Weight (Package, kg)
1,5 kg
Power
Rechargeable battery
Yes
Product dimensions
Net Weight (Product, kg)
1,2 kg
Vendor information
Brand Name
Warranty
5 Aasta(d)
Kirjeldus
high-performance, HD optical fiber Fusion Splicer.
Graphical interfaces and touch screen
uses entirely new GUI graphical interfaces and touch screen in design. Operators can set up the splicer
and get to know relevant information of it simply and directly by graphical interfaces.
Water-resistant and dust-resistant can meet IP52 requirements.
The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and rubber-insulted wires with a
cladding diameter of 80～150μ m.
Small in size and light in weight, the splicer is easy to carry and can be lift by one hand.
A detection unit is embedded in the heater. The heating function will only be enabled when the thermal
shrinkage tube is put in the heater, to avoid misoperation.
Ceramic V-block with high precision brings you convenient and accurate placement of optical fibers and makes
cleanup easy.
Dokumendid
*Ülaltoodud tooteandmed esitab Icecat. EET ei saa pidada vastutavaks sellega seotud vigade eest.