- Esileht
- Serveri-, arvuti- ja printerivaruosad
- Printerid ja varuosad
- Printimistarvikud
- 3D materjalid
- eSTUFF PLA Silk 1,75mm 1KG Blue(Gearlab box) – GLB251240
eSTUFF PLA Silk 1,75mm 1KG Blue(Gearlab box)
eSTUFF PLA Silk 1,75mm 1KG Blue(Gearlab box)
MPN GLB251240
Toote nr W126146185
EAN / UPC 5704174477990
Laoseis
Seda toodet on piiratud koguses
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent a...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Spetsifikatsioonid GLB251240
Features
Brand compatibility
Universal
Diameter tolerance
0,05 mm
Elongation at break
4 protsenti
Flexural modulus
2150 MPa
Flexural strength
63 MPa
Impact strength
46,1 kJ/m²
Melting point (max)
180 °C
Non-toxic
Yes
Print speed
150 mm/s
Print temperature guideline
210 °C
Printing colours
Blue
Printing material
Polylactic acid (PLA)
Tensile strength
1260 kPa
Package dimensions
Depth (package,cm)
7,5 cm
Gross Weight (Package, kg)
1,12 kg
Height (package,cm)
20,5 cm
Width (package,cm)
20,5 cm
Product dimensions
Net Weight (Product, kg)
1,05 kg
Product Depth
7 cm
Product Height
20 cm
Product Width
20 cm
Vendor information
Brand Name
Warranty
1 Aasta(d)
Weight & dimensions
Diameter
1,75 mm
Kirjeldus
PLA Silk 1,75mm 1KG Blue(Gearlab box)
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
Dokumendid
*Ülaltoodud tooteandmed esitab Icecat. EET ei saa pidada vastutavaks sellega seotud vigade eest.