MPN GLB251005
EAN / UPC 5706998849540
Laoseis
Seda toodet on piiratud koguses
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...
Pantone 123
Smoke- and odour-free printing
Enhanced post-print workability
Easy to print filament with stable printing size and low material shrinkage
Environmentally friendly, bio-degradable polymer
Universal
0,05 mm
3 protsenti
2300 MPa
60 MPa
125 °C
3 kJ/m²
Yes
90 mm/s
220 °C
Yellow
Polylactic acid (PLA)
500 kPa
21,4 cm
1,322 kg
7,6 cm
21,5 cm
1 tk
1 kg
1 Aasta(d)
1,75 mm
1,75 mm
3400 cm
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.
With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.
*Ülaltoodud tooteandmed esitab Icecat. EET ei saa pidada vastutavaks sellega seotud vigade eest.