- Inicio
- Vigilancia y Seguridad
- Control de acceso
- Lectores
- Lectores de control de acceso
- Paxton Teclado con lector de proximidad KP75 Switch2 / Net2, MIFARE – 375-130-EX
Paxton Teclado con lector de proximidad KP75 Switch2 / Net2, MIFARE
Paxton Teclado con lector de proximidad KP75 Switch2 / Net2, MIFARE
MPN 375-130-EX
EAN / UPC 5055169517413
OEM PX/375-130-EX, 8254
Nivel de existencias
About – A metal housed keypad and proximity reader primarily for external use. It reads MIFARE 1k®, MIFARE 4k®, MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE® DESFire® and MIFARE® DESFire® EV1 tokens.
Installation – The reader is wired as shown on the control unit label. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if...
A neat solution for exterior or interior
Industry leading technical support
Five year product guarantee
Especificaciones de 375-130-EX
Camera
Cámara frontal
No
Display
Pantalla integrada
No
Operational conditions
Temperatura de funcionamiento (T-T)
-35 - 66 °C
Package dimensions
Depth (package,cm)
19 cm
Gross Weight (Package, kg)
1,6 kg
Height (package,cm)
17,5 cm
Width (package,cm)
5,5 cm
Power
Consumo de energía
180 mA
Product dimensions
Net Weight (Product, kg)
0,43 kg
Product Depth
19 cm
Product Height
5,5 cm
Product Width
17,5 cm
Technical details
Código de protección (IP)
IPX7
Color producto
Silver
Lector de chips/tarjetas de acceso
Yes
Lector de códigos de acceso
Yes
Lectores de huella dactilar
No
Material de la carcasa
Metal
Máxima longitud cable
5 m
Tipo
Basic access control reader
Tipo de autenticación
Access chip/card, Password
Vendor information
Brand Name
Warranty
5 Año/s
Descripción
Teclado con lector de proximidad KP75 Switch2 / Net2, MIFARE
About – A metal housed keypad and proximity reader primarily for external use. It reads MIFARE 1k®, MIFARE 4k®, MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE® DESFire® and MIFARE® DESFire® EV1 tokens.
Installation – The reader is wired as shown on the control unit label. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation – A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
*MIFARE®, MIFARE® Plus, MIFARE® Ultralight and MIFARE® DESFire® are registered trademarks of NXP B.V. and are used under license.
*Los datos de producto anteriores son proporcionados por Icecat. EET no se hace responsable de los errores en relación con esto.