Brodit 213 x 182 x 50 mm, 517 g

Clearance sale

Brodit 213 x 182 x 50 mm, 517 g

MPN 736101

Item no. W126348418

EAN/UPC 7320287361018

Stock level

There is a limited quantity of this product

This holder is to be used when you want to secure your Panasonic and still have it easy accessable.

The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 1 A charger. Charging via pogo plug. Professional installation recommended.

Easy-switching system:

The easy-switching system ena...

Read full description
  • Active holder for fixed installation

  • with tilt swivel

  • 2 keys included

Specifications for 736101

Design

Compatibility

Panasonic FZ-L1

Device mount type

Screw mount

Mobile device type

Tablet/UMPC

Product colour

Black

Proper use

Indoor

Type

Active holder

Package dimensions

Depth (package,cm)

5 cm

Gross Weight (Package, kg)

0.517 kg

Height (package,cm)

18.2 cm

Width (package,cm)

21.3 cm

Packaging data

Quantity per pack

1 pc(s)

Power

Built-in charger

Yes

Product dimensions

Net Weight (Product, kg)

0.41700000000000004 kg

Product Depth

5 cm

Product Height

18.2 cm

Product Width

21.3 cm

Vendor information

Brand Name

Homepage

http://www.brodit.se/product.html?locale=se&id=736101

Warranty

1 Year(s)

Description

213 x 182 x 50 mm, 517 g

This holder is to be used when you want to secure your Panasonic and still have it easy accessable.

The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 1 A charger. Charging via pogo plug. Professional installation recommended.

Easy-switching system:

The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Panasonic unit without having it easy removable. The holder is equipped with a lock. In order to remove the unit from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.

*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.

EET IrelandBalheary Demense, Balheary Road, SwordsK67 E5AO Co. DublinVAT no. 6400016V
Ireland / English