- Home
- Surveillance & Security
- Peripherals
- Converters/Repeaters/Isolators
- Moxa RS-232/422/485 to fiber slide-in modules for the NRack System™ – 43424
Moxa RS-232/422/485 to fiber slide-in modules for the NRack System™
Moxa RS-232/422/485 to fiber slide-in modules for the NRack System™
MPN 43424
Item no. 43424M
EAN/UPC 5703431434240
OEM TCF-142-M-ST-RM
Stock level
RS-232/422/485 to fiber slide-in modules for the NRack System
The TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal.
Features:
Extend RS-232/422/485 transmission up to:
- 40 km with single mode;
- 5 km with multi-mode.
1K or 150K ohm adjustable pull high/low resistor.
“Ring" and "Point-to-Point" transmissio...
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
1 or 150 kilo-ohm adjustable pull high/low resistor
Supports ring and point-to-point transmission
Similar alternatives
Specifications for 43424
Certificates
Certification
EN, CE, FCC, IEC
Safety
UL/CUL
Indication
LED indicators
Yes
Material
Housing material
SPCC
Operational conditions
Operating relative humidity (H-H)
5 - 95 %
Operating temperature (T-T)
0 - 60 °C
Storage temperature (T-T)
-20 - 75 °C
Package dimensions
Depth (package,cm)
22 cm
Gross Weight (Package, kg)
0.325 kg
Height (package,cm)
8 cm
Width (package,cm)
16 cm
Power
Input voltage
12 V
Power consumption
150 mA
Product dimensions
Net Weight (Product, kg)
0.225 kg
Technical details
Baud rate
921.6 Kbit/s
Electrostatic Discharge (ESD) protection
15 kV
Fiber optic connector
ST
Host interface
RS-232/422/485
Output interface
Fiber (ST)
Over current protection
Yes
RS-232 signals
GND, Rx, Tx
RS-422 signals
RxD+, RxD-, SGND, TxD+, TxD-
RS-485 signals
Data+, Data-, RxD+, RxD-, SGND, TxD+, TxD-
RX sensitivity
-20 dB
Surge protection voltage
2 kV
Transmission distance (multi-mode)
5 km
TX output
-5 dB
Wavelength
850 nm
Vendor information
Brand Name
Warranty
2 Year(s)
Weight & dimensions
Dimensions (WxDxH)
86.8 x 136.5 x 21 mm
Description
RS-232/422/485 to fiber slide-in modules for the NRack System™
RS-232/422/485 to fiber slide-in modules for the NRack System
The TCF-142-RM series of serial-to-fiber converters are slide-in modules that work with the TRC-190 chassis. The modules convert from the RS-232, RS-422, or RS-485 signal to a fiber optic signal.
Features:
Extend RS-232/422/485 transmission up to:
- 40 km with single mode;
- 5 km with multi-mode.
1K or 150K ohm adjustable pull high/low resistor.
“Ring" and "Point-to-Point" transmission supported.
Documents
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.