- Startseite
- Überwachung & Sicherheit
- Alarmsysteme
- Zubehör
- Alarm- und Melderzubehör
- Ernitec Asguard power supply board 0065-01013 only – 0065-01013
Ernitec Asguard power supply board 0065-01013 only
Ernitec Asguard power supply board 0065-01013 only
MPN 0065-01013
EAN / UPC 5711783519744
Lagerbestand
Von diesem Produkt gibt es nur eine begrenzte Anzahl.
Asguard IAM Intruder Alarm Module is a serial bus connected module that expands the number of zones and outputs of the CP.Asguard IAM features 16 double-end-of-line supervised inputs and 2 dry contact outputs. The inputs accept dry contact outputs from detectors. The 2 outputs can be used either to trigger a siren or communicator in alarm, or to control external devices.Asguard IAM is used for intruder detection and alarm, and remote alarm transmission via the CP.InteroperabilityAsguard IAM acce...
Lesen Sie die vollständige BeschreibungGrade 4 according to EN 50131
16 supervised alarm inputs
2 dry contact outputs
Expandable up to 144 intruder alarm zones
Up to 16 alarm keypads for arming/disarming
3,000 intruder alarm events memory in CP
Metal case with tamper protection
Spezifikationen für 0065-01013
Features
Batteriekapazität
7000 mAh
Batteriespannung
12 V
Markenkompatibilität
Ernitec
Menge pro Packung
1 Stück(e)
Produktart
Power supply
Produktfarbe
Blue, Green
Zertifizierung
CE
Package dimensions
Depth (package,cm)
4,5 cm
Gross Weight (Package, kg)
0,4 kg
Height (package,cm)
16,5 cm
Width (package,cm)
13 cm
Power
Eingangsspannung
230 V
Product dimensions
Height (product,cm)
10,7 cm
Net Weight (Product, kg)
0,15 kg
Product Width
6,3 cm
Tiefe cm
2,9 cm
Vendor information
Beschreibung
Asguard power supply board 0065-01013 only
Asguard IAM Intruder Alarm Module is a serial bus connected module that expands the number of zones and outputs of the CP.Asguard IAM features 16 double-end-of-line supervised inputs and 2 dry contact outputs. The inputs accept dry contact outputs from detectors. The 2 outputs can be used either to trigger a siren or communicator in alarm, or to control external devices.Asguard IAM is used for intruder detection and alarm, and remote alarm transmission via the CP.InteroperabilityAsguard IAM accepts any dry-contact output detector, providing line supervision.ConnectivityRemote management, configuration and monitoring can be done via the Asguard CP on RS485 or over IP, if the CP is fitted with the Asguard ETH Ethernet Module.Ease of InstallationAsguard IAM is supplied with all the accessories needed for easy installation.
Dokumente
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.