- Startseite
- Barox IP- / PoE-Repeater through UTP cables (paired cables) – VI-3002
Barox IP- / PoE-Repeater through UTP cables (paired cables)
Barox IP- / PoE-Repeater through UTP cables (paired cables)
MPN VI-3002
Lagerbestand
The VI-3002 is a 10/100Mbps Ethernet and PoE/PoE+/PoE++ repeater. The repeater allows to connect two or more UTP-Cat5/6 cables and thus to multiply the cable distance. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. Due to the small dimensions, the repeaters can also be mounted in very confined spaces.
IP/PoE-repeater for UTP cables
Distances up to 200m
PoE 802.1af, at and PoE++
No power supply needed in PoE mode
Spezifikationen für VI-3002
Data transmission
Maximum Datenübertragungsrate
100 Mbit/s
Maximum Übertragungsentfernung
200 m
Features
LED-Anzeigen
Yes
Produktart
Network repeater
Produktfarbe
Black
Network
Ethernet-LAN
Yes
Ethernet-LAN-Datenraten
10/100 Mbit/s
Ethernet-LAN-Schnittstellentyp
Fast Ethernet
Netzwerkstandards
IEEE 802.3/IEEE 802.3at/IEEE 802.3u
Verkabelungstechnik
10/100Base-T(X)
Package dimensions
Depth (package,cm)
12.1 cm
Gross Weight
0.05 kg
Height (package,cm)
2.5 cm
Width (package,cm)
4.2 cm
Packaging data
Menge pro Packung
1 Stück(e)
Ports & interfaces
Anzahl der Power over Ethernet Plus (PoE+) Ports
2
Ethernet-LAN-Anschlüsse (RJ-45)
2
Konnektivitätstechnologie
Wired
Power
Stromverbrauch (typisch)
1 Watt
Product dimensions
Depth (product,cm)
6.9 cm
Height (product,cm)
2.3 cm
Net Weight
0.045 kg
Width (product,cm)
2.5 cm
Vendor information
Beschreibung
IP- / PoE-Repeater through UTP cables (paired cables)
The VI-3002 is a 10/100Mbps Ethernet and PoE/PoE+/PoE++ repeater. The repeater allows to connect two or more UTP-Cat5/6 cables and thus to multiply the cable distance. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. Due to the small dimensions, the repeaters can also be mounted in very confined spaces.
Dokumente
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.