MPN LT-LPIGE-802GBTME
EAN / UPC 5715063289570
Lagerbestand
Robust and high quality industrial switches for the use in 10/100/1000 IEEE802.x Ethernet IP-networks with high data loads. All copper ports are PoE+ capable. The switches may be used in redundant ring topologies with a recovery time of less than 50ms. Two or four SFP bays allow the use of fiber optic with multimode or singlemode fiber. With the high data rate of the backplane these switches are predestinated for the use in networks with a high traffic load as for instance in video surveillance....
Lesen Sie die vollständige BeschreibungRail DIN mounting
Copper ports: 8x10/100/1000Tx, RJ45, PoE802.3af/at
Optical-fibre ports 2 or 4 x 100/1000 Mbit/s SFP
Layer 3 static routing
with management, ring-capable
Power supply 44-56VDC, redundant
4
9600
8000 Eintragungen
20 Gbit/s
Yes
Yes
Yes
No
Y/Yes
Black
IEC61000-4-2, 4-3, 4-4, 4-5, 4-8, IEC61000-6-2, 6-4 IEC60068-2-32 IEC60068-2-27 IEC60068-2-6 FCC Class A, CE, UL
L3
Yes
Managed
Yes
Yes
Yes
No
64
Yes
10/100/1000 Mbit/s
Yes
1000BASE-T/100BASE-TX/10BASE-T
Yes
IEEE 802.1ab/IEEE 802.1D/IEEE 802.1p/IEEE 802.1Q/IEEE 802.1s/IEEE 802.1w/IEEE 802.1x/IEEE 802.3/IEEE 802.3ab/IEEE 802.3ad/IEEE 802.3at/IEEE 802.3u/IEEE 802.3x/IEEE 802.3z
Yes
Yes
Port-based VLAN/Tagged VLAN
Yes
Yes
-40 - 75 °C
23.6 cm
1.28 kg
8.9 cm
17.8 cm
2
1
8
8
Gigabit Ethernet (10/100/1000)
RJ-45
48 - 55 V
15 Watt
Yes
8
Yes
9.9 cm
14.2 cm
1.105 kg
5.6 cm
Telnet, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON
Yes
Robust and high quality industrial switches for the use in 10/100/1000 IEEE802.x Ethernet IP-networks with high data loads. All copper ports are PoE+ capable. The switches may be used in redundant ring topologies with a recovery time of less than 50ms. Two or four SFP bays allow the use of fiber optic with multimode or singlemode fiber. With the high data rate of the backplane these switches are predestinated for the use in networks with a high traffic load as for instance in video surveillance. The powerful management allows the use of these switches in big and structured networks. The switch is made for mounting on DIN-rail bars.
Video-friendly features:
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s.
Active monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.
Active monitoring PoE-supply
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.
Active management of the PoE-performance
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.