MPN LB20-PC60EW-5D
EAN / UPC 8717332943456
Lagerbestand
The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide.
The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC ...
Carefully engineered for the toughest weather conditions (IP65)
Long throw 5.25" (133 mm) woofer housed in a UL 94-5VB fire rated ABS plastic for extended LF performance down to 55 Hz
90 W power handling provides for 108 dB maximum SPL (114 dB Peak)
60 W transformer with 8 Ω pass-through
Built-in
89 dB
55 - 20000 Hz
8 Ohm
75 Watt
300 Watt
1
1
2
2.0 Kanäle
Yes
2 cm
0.75 "
Tabletop/bookshelf, Wall-mountable
2-way
Polypropylene
Yes
5.25 "
13.3 cm
32.5 cm
7.74 kg
42 cm
26 cm
2 Stück(e)
Yes
Yes
Universal
Acrylonitrile butadiene styrene (ABS), Aluminium
Black
IEC 60068-2-5, IEC 60068-2-11, IEC 60068-2-42, IEC 60068-2-60, IEC 60529
No
Wired
Yes
70 - 100 V
AC
7.5, 15, 30, 60
0.42 cm
6.41 kg
0.26 cm
0.325 cm
3 Jahre)
19.5 cm
The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide.
The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum.
The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw.
The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket.
The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.