MPN M0125
Artikel-Nr. W128429790
EAN / UPC 889418001256
Lagerbestand
The Rack Mount Kit 3 (RMK3) contains rails and accessories for installing a myUTN-800 or
dongleserver ProMAX into a rack.
These rails will fit a 19" rack that is at least 14.5" deep.
This installation guide describes the installation of a myUTN-800 respectively dongleserver ProMAX into a rack using the RMK3.
There are a variety of racks on the market, which may mean the installation procedure will differ slightly. Also refer to the installation instructions that came with the rac...
0,26 kg
Yes
0,1 cm
0,2 kg
0,63 cm
0,11 cm
SEH myUTN-800 / ProMAX
Yes
CE
Black
1 Jahre)
The Rack Mount Kit 3 (RMK3) contains rails and accessories for installing a myUTN-800 or
dongleserver ProMAX into a rack.
These rails will fit a 19" rack that is at least 14.5" deep.
This installation guide describes the installation of a myUTN-800 respectively dongleserver ProMAX into a rack using the RMK3.
There are a variety of racks on the market, which may mean the installation procedure will differ slightly. Also refer to the installation instructions that came with the rack you are using.
Only pull out the myUTN-800 respectively dongleserver ProMAX temporarily for installation,
maintenance and the connection or removal of USB devices.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.