MPN LVO231815UNI
Artikel-Nr. W126994948
EAN / UPC 5704174892441
Lagerbestand
This Uniboot cable comes with a lot of great features to take your networking setup to the next level, Uniboot cables comes with both the fibre leads coated in a single jacket, meaning there is more room for airflow in the rack. This also means the insertion loss is low.
Another special feature of the Uniboot cable is the option to switch polarities, simply remove the top cover and you can swap the connectors to change the polarity, no need to swap to another cable with Uniboot.
Th...
UniBoot to minimize insertionloss
Easy to handle
LSZH (Low Smoke Zero Halogen) and flame retardant
Pre tested with test report
Reverse Polarity—with a few simple steps, the connectors polarity of the LC Uniboot fiber patch cables can be reversed without need of connector re-termination.
Quick Release Latch—the latch of LC Uniboot fiber patch cable allows for the quick and easy release of this connector from the adapter panel, which makes great sense in the growing trend of high density applications.
Male/Male
0,18 dB
10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Multi-mode
OM4
Yes
Low smoke zero halogen (LSZH)
Duplex
10 m
125 µm
Yes
Blue
LC/UPC
Male
LC/UPC
Male
850, 1300
Yes
Rohs
8 cm
0,035 kg
15 cm
15 cm
1 Stück(e)
1000 cm
0,034 kg
0,3 cm
Halogen
Yes
RoHS
5 Jahre)
3 mm
This Uniboot cable comes with a lot of great features to take your networking setup to the next level, Uniboot cables comes with both the fibre leads coated in a single jacket, meaning there is more room for airflow in the rack. This also means the insertion loss is low.
Another special feature of the Uniboot cable is the option to switch polarities, simply remove the top cover and you can swap the connectors to change the polarity, no need to swap to another cable with Uniboot.
This cable lives up to the OM4 fibre standard to connect to high speed and legacy networks like 10/40/100 gigabit. This cable standard is ideal for for connecting 40G BIDI SR, 10G SR, QSFP+, SFP+ transceivers etc.
The cable is made of LSZH material to live up to Telecordia, EIA TIA or IEC standards.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.