eSTUFF PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)

eSTUFF PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)

MPN GLB251326

EAN / UPC 5706998989079

Lagerbestand

Von diesem Produkt gibt es nur eine begrenzte Anzahl.

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



...

Lesen Sie die vollständige Beschreibung
  • Pantone 871

  • Environmentally friendly bio-degradable polymer

  • Enhanced post-print workability

  • Smoke- and odour-free printing

  • Pearl effect to give an almost satin metallic finish when polished

Spezifikationen für GLB251326

Features

Biegefestigkeit

50 MPa

Biegemodul

2300 MPa

Bruchdehnung

50 %

Druckgeschwindigkeit

60 mm/sek

Druckmaterial

Polylactic acid (PLA)

Durchmessertoleranz

0,05 mm

Farben drucken

Gold

Glasübergangstemperatur (min)

125 °C

Markenkompatibilität

Any brand

Schlagfestigkeit

0,025 kJ/m²

Temperaturrichtlinie drucken

200 °C

Ungiftig

Yes

Zugfestigkeit

500 kPa

Package dimensions

Depth (package,cm)

21,3 cm

Gross Weight (Package, kg)

1,31 kg

Height (package,cm)

7,4 cm

Width (package,cm)

21,3 cm

Packaging data

Menge pro Packung

1 Stück(e)

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 Jahre)

Weight & dimensions

Dicke

2,85 mm

Durchmesser

2,85 mm

Kabellänge

1280 cm

Beschreibung

PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.



With Pearl PLA it is easy to print big parts due to its thermal stability. While PLA is stiff, hard, and more brittle than other compounds, Pearl PLA is much stronger and offers 8 times higher impact strength than normal PLA.



Pearl PLA 3D Filament is ideal for educational use as part of STE@M learning, as well as for corporate and private concept and rapid prototype modelling.

*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.

EET ÖsterreichEnergiestrasse 22540 Bad VöslauMwSt.-Nummer ATU65975705
Österreich / Deutsch