eSTUFF PLA 3D 2.85mm filament Purple 1kg(Gearlab box)

eSTUFF PLA 3D 2.85mm filament Purple 1kg(Gearlab box)

MPN GLB251314

EAN / UPC 5706998988997

Lagerbestand

Von diesem Produkt gibt es nur eine begrenzte Anzahl.

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...

Lesen Sie die vollständige Beschreibung
  • Pantone 51-1-7

  • Smoke- and odour-free printing

  • Enhanced post-print workability

  • Easy to print filament with stable printing size and low material shrinkage

  • Environmentally friendly, bio-degradable polymer

Spezifikationen für GLB251314

Features

Biegefestigkeit

50 MPa

Biegemodul

2300 MPa

Bruchdehnung

50 %

Druckgeschwindigkeit

60 mm/sek

Druckmaterial

Polylactic acid (PLA)

Durchmessertoleranz

0,05 mm

Farben drucken

Purple

Glasübergangstemperatur (min)

125 °C

Markenkompatibilität

Any brand

Schlagfestigkeit

0,025 kJ/m²

Temperaturrichtlinie drucken

200 °C

Ungiftig

Yes

Zugfestigkeit

500 kPa

Package dimensions (verified)

Depth Verified

23,9 cm

Gross Weight Verified

1,32 kg

Height Verified

8 cm

Width Verified

24 cm

Packaging data

Menge pro Packung

1 Stück(e)

Product dimensions

Net Weight (Product, kg)

1 kg

Vendor information

Brand Name

Warranty

1 Jahre)

Weight & dimensions

Dicke

2,85 mm

Durchmesser

2,85 mm

Kabellänge

1280 cm

Beschreibung

PLA 3D 2.85mm filament Purple 1kg(Gearlab box)

Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.



Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.



Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.



With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.

*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.

EET ÖsterreichEnergiestrasse 22540 Bad VöslauMwSt.-Nummer ATU65975705
Österreich / Deutsch