MPN GLB251311
EAN / UPC 5706998988959
Lagerbestand
Von diesem Produkt gibt es nur eine begrenzte Anzahl.
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where d...
Pantone 37-1-7
Environmentally friendly, bio-degradable polymer
Smoke- and odour-free printing
50 MPa
2300 MPa
50 %
60 mm/sek
Polylactic acid (PLA)
0,05 mm
Magenta
125 °C
Any brand
0,025 kJ/m²
200 °C
Yes
500 kPa
21,1 cm
1,316 kg
7,8 cm
21,2 cm
1 Stück(e)
1 kg
1 Jahre)
2,85 mm
2,85 mm
1280 cm
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.
With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.