MPN GLB251221
Artikel-Nr. W126146180
EAN / UPC 5704174477945
Lagerbestand
Von diesem Produkt gibt es nur eine begrenzte Anzahl.
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent a...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
63 MPa
2150 MPa
4 %
150 mm/sek
Polylactic acid (PLA)
0,05 mm
White
Universal
46,1 kJ/m²
180 °C
210 °C
Yes
1260 kPa
7,5 cm
1,12 kg
20,5 cm
20,5 cm
7 cm
20 cm
1,05 kg
20 cm
1 Jahre)
1,75 mm
Gearlab Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.