MicroConnect Network and Communication Cable Tester, RJ45 and BNC

campaign-icon
See our full range of standard cables here

MicroConnect Network and Communication Cable Tester, RJ45 and BNC

MPN CAB-TEST9

Artikel-Nr. W125856628

EAN / UPC 5704174236702

OEM DN-14001-1

Lagerbestand

Cable tester, network, RJ45, BNC main device, remote unit, PoE tester, with case.



Future-oriented standards and high-end quality for your network.

With the cable tester you can easily check if your network cabling is correct and immediately detect if an Ethernet cable is not installed correctly

In addition to a pure continuity check, it can also check whether two strands were swapped or are causing a short-circuit: thanks to the ...

Lesen Sie die vollständige Beschreibung
  • Package content: 1 x Main Device 1 x Remote device 1 x PoE testing device 2 x BNC adapter cable 1 x BNC plug/plug adapter 3 x RJ45 to RJ11 adapter

campaign-icon
Lanview 305m Cat5e U-UTP cable 4x2xAWG24 LSZH white
Lanview 305m Cat5e U-UTP cable 4x2xAWG24 LSZH white
Entwickelt für professionelles Netzwerk
MPN
Artikel-Nr.
LVN122014
W125941328
Lanview 500m Cat6a U-FTP cable 4x2xAWG23 PE black outdoor
Lanview 500m Cat6a U-FTP cable 4x2xAWG23 PE black outdoor
Entwickelt für professionelles Netzwerk
MPN
Artikel-Nr.
LVN122445
W125941340

Spezifikationen für CAB-TEST9

Package dimensions

Depth (package,cm)

12 cm

Gross Weight (Package, kg)

0,2 kg

Height (package,cm)

4,6 cm

Width (package,cm)

18 cm

Packaging content

Aufbewahrungstasche

Yes

Kabel enthalten

Phone (RJ-11), BNC

Product dimensions

Net Weight (Product, kg)

0,1 kg

Technical details

Anzeigetyp

LED

Einfach zu verwenden

Yes

Produktfarbe

Black

RoHS-Konformität

Yes

Selbstkontrollfunktion

Yes

Testtyp

PoE tester

Unterstützte Anschlüsse

BNC, RJ-45, RJ-11

Vendor information

Brand Name

Warranty

4 Jahre)

Beschreibung

Network and Communication Cable Tester, RJ45 and BNC

Cable tester, network, RJ45, BNC main device, remote unit, PoE tester, with case.



Future-oriented standards and high-end quality for your network.

With the cable tester you can easily check if your network cabling is correct and immediately detect if an Ethernet cable is not installed correctly

In addition to a pure continuity check, it can also check whether two strands were swapped or are causing a short-circuit: thanks to the remote unit, this is possible even for installation cables that have already been installed

Depending on the circumstances, you can switch between the manual test and an automatic check loop test that systematically tests one strand after another and then starts again from the beginning.

The PoE tester shows you whether a PoE signal is present at a port or network socket and which PoE mode is involved: the PoE finder is compatible with PoE standards.

The testing device is suitable for all network cables, from Cat-3 & Coax BNC to Cat-5 & Cat-6 and Cat-7A as well as UAE, TAE and telephone cables, and is useful during cable installation for your DSL connection for example

*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.

EET ÖsterreichEnergiestrasse 22540 Bad VöslauMwSt.-Nummer ATU65975705
Österreich / Deutsch