Allied Telesis 100TX to 100FX (SC) standalone media converter

Allied Telesis 100TX to 100FX (SC) standalone media converter

MPN AT-MC102XL

EAN / UPC 767035191744

OEM AT-MC102XL-20

Lagerbestand

Fibre connections
The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.

Auto-negotiation and MissingLink™
The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their ...

Lesen Sie die vollständige Beschreibung

    Spezifikationen für AT-MC102XL

    Design

    Sicherheit

    UL-Cul, CSA/CSA, NRTL, TUV, CE

    Logistics data

    Code des Harmonisierten Systems (HS)

    85176990

    Network

    Maximum Datenübertragungsrate

    100 Mbit/s

    Verkabelungstechnik

    UTP & FO

    Operational conditions

    Betriebstemperatur (TT)

    0 - 40 °C

    Lagertemperatur (TT)

    -20 - 80 °C

    Relative Luftfeuchtigkeit im Betrieb (HH)

    5 - 95 %

    Other features

    Datenverbindungsprotokolle

    IEEE 802.1Q

    Dimensions (WxDxH)

    105 x 95 x 25 mm

    Elektromagnetische Emissionen

    FCC Class B

    I/O-Ports

    RJ-45 SC

    Schnittstelle

    Fast Ethernet

    Package dimensions (verified)

    Depth Verified

    15,5 cm

    Gross Weight Verified

    0,698 kg

    Height Verified

    8,5 cm

    Width Verified

    28,3 cm

    Ports & interfaces

    Konnektivitätstechnologie

    Wired

    Power

    Stromverbrauch (typisch)

    6 Watt

    Product dimensions

    Net Weight (Product, kg)

    0,2 kg

    Technical details

    Code des Harmonisierten Systems (HS)

    85176990

    Vendor information

    Brand Name

    Warranty

    1 Jahre)

    Beschreibung

    100TX to 100FX (SC) standalone media converter

    Fibre connections
    The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.

    Auto-negotiation and MissingLink™
    The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to each
    other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost.

    Simple installation
    Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch
    with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment.

    Standalone or rackmounted
    Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low
    cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second
    load sharing internal power supply can be installed into the rackmount chassis.

    *Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.

    EET ÖsterreichEnergiestrasse 22540 Bad VöslauUSt-ID Nr. ATU65975705
    Österreich / Deutsch