MPN 9159054
Artikel-Nr. W125875555
Lagerbestand
2N® Induction Loop wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.
AUDIO TRANSMISSION TO HEARING AIDS
Communicate with hearing impaired persons. The induction loop transmits soun...
Audio transmission to hearing aids
Simple connection to the 2N IP intercom
Built-in antenna
Wall
-20 - 50 °C
2N Telecommunications
White
-20 - 50 °C
22,6 cm
0,39 kg
8,3 cm
14,9 cm
19,6 cm
5,3 cm
0,29 kg
11,9 cm
3 Jahre)
2N® Induction Loop wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.
AUDIO TRANSMISSION TO HEARING AIDS
Communicate with hearing impaired persons. The induction loop transmits sound to all standard hearing aids in accordance with the IEC 60118-4 standard.
SIMPLE CONNECTION TO THE 2N IP INTERCOM
Connect any 2N IP intercom to the induction loop. Thanks to the special-purpose connector, you won’t have to configure anything.
BUILT-IN ANTENNA
The induction loop has a built-in antenna, which covers the area in front of it with a signal for listening devices.
SUITABLE FOR OUTDOOR USE
With its IP65 standard compliance, the inductive loop is weather-resistant and therefore suitable for outdoor use.
STANDBY MODE
When there is no audio signal the inductive loop automatically switches to energy-saving mode.
EASY FITTING
The 2N® Induction Loop easily mounts to the wall with 2 screws. You then connect one cable to the signal source and the other to the power feed.
ARBITRARY AUDIO INPUT
With the induction loop, you can make use of any signal source, e.g.. IP intercoms, lift communicators, etc.
ADJUSTABLE VOLUME
The induction loop output volume level can be adjusted to suit where you install it.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.