Brodit For Apple iPhone 6S, DC/12V, cig-plug, USB

Brodit For Apple iPhone 6S, DC/12V, cig-plug, USB

MPN 514795

EAN/UPC 7320285147959

Lager

Holder for Cable Attachment
For use with Apple original Lightning to USB Cable. Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.

This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

Note! Cable not included.

...

Læs den fulde beskrivelse

    Specifikationer for 514795

    Design

    Compatibility

    Apple iPhone 6S Fits devices with skin

    Material

    ABS synthetics

    Mobile device type

    Tablet/UMPC

    Product colour

    Black

    Proper use

    Car

    Multimedia

    Built-in speaker(s)

    No

    Package dimensions

    Gross Weight (Package, kg)

    0,3 kg

    Power

    Power source type

    Cigar lighter, USB

    Product dimensions

    Net Weight (Product, kg)

    0,19999999999999998 kg

    Technical details

    Adjustable

    Yes

    Vendor information

    Brand Name

    Homepage

    http://www.brodit.se/product.html?locale=se&id=514795

    Warranty

    1 År

    Beskrivelse

    For Apple iPhone 6S, DC/12V, cig-plug, USB

    Holder for Cable Attachment
    For use with Apple original Lightning to USB Cable. Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.

    This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

    Note! Cable not included.

    The cable attachment holder can be combined with the Apple original Lightning to USB Cable that came with your iPhone 6s (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the car’s USB socket, or use it with a USB/cig-plug adapter for the car’s 12V socket.

    To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder. Fits devices with slim sized skins. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

    The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

    INSTALLATION INSTRUCTIONS:
    Please read all of the instructions and look at the pictures before attaching the holder.

    1. Place the connector of the cable in the hole in the lower part of the holder. Carefully press the connector downward and forward so it passes the locking and goes into the hole. Press until you hear/feel the connector snap into place in the holder.

    2. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in place. Tighten the screws on the front side of the holder.

    3. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

    4. The holder is in place.

    *Produktdata ovenfor leveres af Icecat. EET kan ikke holdes ansvarlig for fejl i forbindelse hertil.

    EET Danmark A/SBregnerødvej 133 D3460 BirkerødCVR nr. 33946201
    Danmark / Dansk